06 Welding wire reels

Welding wire reels, high precision spools and adapters for different coil weights. Suitable for automatic winders and can be labelled.

SPECIAL REQUESTS

If required for certain reasons, additional holes can be provided.We look forward to your enquiry. Reel SD 300 K, OS can also be supplied with an additional label area.

 TOLERANCES

All dimensions, weights and loads stated are approximate values; tolerances and deviations which are customary for the industry remain reserved.

Important

Shrink-wrapped pallets of packages must not be stored in direct sunlight, as the heat build-up may cause the plastic to warp permanently. Pallet packing is not suitable for reels with a flange diameter of up to approx. 120 mm. They are therefore supplied in cardboard boxes. Larger reels, on the other hand, should be packed on pallets, as this ensures easier handling during transport. For long distance transport, we recommend full truckload shipping , i.e. approx. 20 pallets.

Material

The following reels are made of high impact resistant polystyrene in the colour anthracite. On request, further colours are available, e.g. white, red, blue, green, etc. For special applications, the reels can also be made of other materials, e.g. ABS = acrylonitrile-butadiene-styrene or SAN = styrene-acrylonitrile copolymer. Further details can be found in our material data sheets. We look forward to your enquiry.

Material Information
Designation Flange Ø Barrel Ø Central bore Ø Width Winding width Flange thickness Winding-
volume
Central bore Ø
tapered part
Drive-
hole/pin
Drive-
distance
d1 [mm] d2 [mm] d3 [mm] L1 [mm] L2 [mm] S [mm] V [cm³] d4 [mm] d5 [mm] E1 [mm]
Reel SD 100/40 K 100 38 16.5 45 38.5 3.2 258
Reel SD 100/53,5 100 53.5 41.4 54 46 4 257
Reel SD 100/60 K 100 57 16.5 45 38.5 3 204
Reel SD 117 117 54 48 71 57.5 6.8 491
Reel SD 118 117 54 48 71 57.8 6.6 491
Reel HD 135/16,5 135 57 16.5 49 43 3 505
Reel HD 150/19-100 150 55 19.3 100 94 3 1427 1x9 19
Adaptor with slider 190 178.5 51.5 107 1x11 44.5
Reel HD 200/52-74 200 105 50.5 74.4 70 2.2 1592
Reel SD 200 K 200 105 50.5 55 45 5 1024 1x10 44.5
Reel SD 200/50,5-53 K 200 105 50.5 53 45 3.8 1024 1x10 44.5
Reel SD 200/52-43 K 200 105 50.5 43 35 4 796 1x10 44.5
Reel SD 200/52-80 K 200 105 50.5 80 70 5 1592 1x10 44.5
Reel SD 230 230 208 55.4 102 95 3.5 718
Reel SH 253 K 253.5 221 215 37 30 3.5 363
Adaptor K 300 277 185 50.5 102
Reel SD 300 K 300 212 51.5 103 91 6 3220 1x10 44.5
Reel SD 300 K-LB 300 212 51.5 103 90.5 6 3220 1x10 44.5
Reel SD 300 K AW 300 212 51.5 103 90.4 5.8 3200 1x11 44.5
Reel SD 300 K OS 300 212 51.5 103 91 6 3220 1x13 44.5
Reel SD 300/20 K 300 180 51.5 103 85 9 3845 1x10 44.5
Reel SD 300/20 K-AW 300 180 51.5 103 85 9 3845 1x10 44.5
Reel SD 350 K AW 350 212.5 51.7 103 89.9 6.6 5461 1x11 44.5
Reel SH 370 K 370 311 305 80 70 5 2209
Reel SH 370/90 K 370 310 305 88 80 4 2564
Reel SH 390 K 390 310 305 89 79 5 3475
Reel SH 390/93,5 396 310 305 93.5 80 4 3865
Reel SH 460 K 460 319 305 105 91 7 7850

Technical drawing

Spools

    Our Certification

    Our quality management system has been ISO 9001-certified since 1997, and our environmental management system has been ISO 14001-certified since 1999. In October 2012, our energy management system was certified in accordance with DIN EN ISO 50001.